EP HIPOT ELECTRIC CO., LTD.  

Product Name: 10V~550kv Wireless High Voltage Phase Detector, Voice Wireless Phase Sequence Checking Device for High Voltage Power Transmission Line Model NO.: EP8210A Weight: 0-100Kg Display: 3.5 Inch True Color LCD Display Type: Universal Testing Machine Function: Wireless High and Low Voltage Voice Phase Checking Phase Checking Voltage Level: AC 10V~550kv Transmission Method: 315MHz and 433MHz Wireless Transmission Phase Checking Distance: about 1600m Display Mode: 3.5 Inch True Color LCD Display Phase: 0.0degree ~360.0 Degree Frequency: 45Hz~75Hz Resolution: 0.1degree , 0.1Hz Phase Precision: Less Than +-10 Degree Frequency Precision: Less Than +- 2Hz Size of Insulation Rod: about 5m Long After Extended Data Storage: 9999 Sets Detector Weight: 205g (Including Battery) Receiver Weight: 395g (Including Battery) Insulation Rod Weight: 1.45kg Trademark: EP Hipot Electric Transport Package: Carton Origin: Wuhan, China HS Code: 9031809090 Product Description General Information:EP8210A Intelligent Wireless High Voltage Phase Detector contains wireless receiver, XY detector, retractable insulated rod and other components. The receiver contains a 3.5-inch true color LCD screen, which can show the phase checking results, phase, frequency, and vector diagram instructions at the same time, which makes it clear and intuitive. The phase checking distance on the open ground is up to 1600m far, full intelligent phase checking of the voltage line covers the voltage of 10V ~ 550kV, in which the bare wire voltage of 35kV and below can be directly conducted with contact phase checking, and the bare wire voltage of over 35kV can be directly conducted with non-contact phase checking. Noncontact phase checking is to make the detector closer to the wire under test, and when the electric signal is inducted, the phase checking will be completed. This method avoids direct contact with the high voltage wire, so it is safer! The phase checking instrument can also function as high-voltage electroscope, high-pressure phase meter and high-pressure phase sequence meter, which can be used for testing electricity, phase sequence test, transformer group judgment and so on.Technical Specifications:FunctionWireless high and low voltage voice phase checking, frequency, phase, phase sequence, electroscope testPower source Receiver: DC 7.4V rechargeable lithium batteryDetector: DC 3.7V rechargeable lithium batteryUSB charging interface, continuous work for about 10 hoursTransmission method315MHz and 433MHz wireless transmissionPhase checking distanceabout 1600m, the distance of phase checking divided into long distance mode (about 1600m) and short distance mode (about 150m) which are switchable (details shown in Basic operations)Display mode3.5 inch true color LCD displayMeasurement rangePhase checking voltage level: AC 10V~550kV Phase: 0.0°~360.0°Frequency: 45Hz~75HzResolution0.1°, 0.1HzPrecisionPhase: ≤±10° (23ºC±5ºC, below 80%RH)Frequency: ≤±2Hz (23ºC±5ºC, below 80%RH)Phase judgeIn phase:-30°~30°; out of phase: 90°~150° and 210°~270°Voice functionVoice such as in phase, out of phase, X signal normal, Y signal normal, etc.Size of insulation rodabout 5m long after extended; about 1m long after drawn back (5 nodes)Data storage9999 setsPhase checking methodContact phase checking: When the bare wire voltage is less than 35kV, or less than 110kV with a safety insulation sheath wire, adopt contact phase checking. (operating with an insulation rod)Noncontact phase checking: When the bare wire voltage is more than 35kV, or more than 110kV with a safety insulation sheath wire, adopt noncontact phase checking. (operating with an insulation rod)Electric indicatorDetector sends out buzz like "beep - beep - beep"Gear shiftAutomatic gear shiftingSample frequency2 times/sInstrument sizeDetector: length width and thickness 145mm×60mm×48mmReceiver: length width and thickness 250mm×100mm×40mmBacklight controlPress Up or Down Arrow button to adjust the backlight luminanceInduction intensity controlDetector automatically increases or decreases the signal amplification factor according to the intensity of the electric field, facilitating the phase checking in a place of intensive linesData maintenancePress HOLD button under testing mode to maintain the data, and then press HOLD button again to cancel the maintenance Exit functionPress ESC button to exit from current interface and return to the upper directoryData referencePress ENTER to determine data reference mode, and press Arrow button to refer to all the stored dataNo-signal indicatorWhen the receiver does not receive the transmission signal, it dynamically displays "----" symbolAutomatic shutdownabout 15mins after startup, the instrument will be automatically shut down to reduce battery consumptionBattery voltageWhen the battery voltage is lower than 3.2V:Detector: the power indicator flashes slowly to promote charging the battery;Receiver: the low battery voltage symbol will be displayed to promote charging the batteryRated currentDetector: 35mA max; Receiver: 300mA maxWeightDetector: 205g (including battery)Receiver: 395g (including battery)Insulation rod: 1.45kg Total weight: 9.8kg (including instrument box)Working humidity and temperature-10ºC~40ºC, below 80%RhStorage humidity and temperature-10ºC~60ºC, below 70%RhInterferenceNo extra strong electromagnetic field, no interference from other 433MHz or 315MHz signalsInsulation intensityInsulation rod: AC 110kV/rms (between both ends after 5 nodes of insulation rod are totally extended)Detector: 2000V/rms (between both ends of outer shell)Receiver: 2000V/rms (between both ends of outer shell)StructureAnti-dripping Type II and IP63Safety rules of satisfactionSatisfy GB13398-92, GB311.1-311.6-8, 3DL408-91 standards and the newly promulgated power industry standard of the state General technical condition DL/T971-2005 for 1kV ~ 35kV portable phase checking device for live work Satisfy IEC61481-A2: 2004; IEC 61243-1 ed.2: 2003 standardsMore details on Wireless HV Phase Detector please contact EP Hipot Electric, we have professional tech team to design correctly designed products and systems.